1.      Install iSavi USB drivers on your laptop/computer/tablet Below are the instructions for Windows XP and Windows 7 (page 45). Windows 8 and Mac OS Xinstructions are on pages 46 – 51.

 

ACCESS SAFE MODE THROUGH MICRO USB CONNECTION

The Micro USB connection is designed as a secondary method to access the Safe Mode. It provides a physical connection from our computer to iSavi™. To establish the Micro USB connection, driver installation is required to the PC for the first time set-up.

 

Install Micro USB driver for Windows XP and Windows 7

1. Ensure the Safe Mode is enabled successfully, with all the four Antenna Pointing LEDs in Amber color, refer to page 63, Appendix A: Antenna Pointing LED Status Table.

2. RNDIS USB driver file is available on the USB drive which is included in the iSavi™ packaging box. You are required to copy the file into your personal computer (Windows XP or Windows 7).

3. Unzip the attached file and select the .inf as the driver file

4. Connect the Micro USB cable to your personal computer.

5. The USB installation should complete with a new network adapter created as USB Remote NDIS device.

6 . Disconnect or remove any physical Ethernet/ Wi-Fi connections of your personal PC and leave only the Micro USB cable which is connected between your personal computer and your iSavi™.

 

2.    Put terminal into Safe Mode manually and perform upgrade

 

With the terminal powered off, first press and hold the Exit Pointing Mode Button, and then press and hold the Power Button. Release both Exit Pointing Mode button and the Power button after 5 seconds simultaneously. See details below

 

Enter Safe Mode by using physical buttons.

 

1. With the terminal off, press and hold ‘Exit Pointing Mode’ button.

2. Press the ‘Power’ button for 5 seconds.

3. Release both ‘Exit Pointing Mode’ button and ‘Power’ button.

4. If Safe Mode is enabled successfully, all the four Antenna Pointing LEDs will turn to Amber color, refer to page 56 , Appendix A: Antenna Pointing LED Status Table.

5. Connect the computer to the Wi-Fi of your iSavi™ .

6. Log in to the Web Console by typing http://iSavi or http://192.168.1.35 into the address bar of any web browser.

 

Note:

The username and password of the Web Console are the same for Normal Mode and Safe Mode.